Mail Print

Roll closing gates

Serie 58

Identification – VU
Type of construction – manual or distance controlled

CHARACTERISTICS AND APPLICATION:

Roll closing gates are intended for installing in inclined (in the space of 50°up to 90° from horizontal level) and in vertical transporting ways (gravitational chutes) of powdered and fine grained (up to 5 mm), loose or aerated materials in technological lines, especially in building materials production. It serves for a quick shutt-off of product in following horizontal or vertical transporting ways. This equipment is designed first of all for milled, powdered materials and it is dustproof. Temperature of dry transported material can be from –30 up to +100°C, at powdered materials with humidity max. 1% is work temperature from 0° up to 100°C.

DIMENSIONS AND PARAMETERS:

Type range of roll closing gates is designed in 8 basic sizes <from 150x150 up to 650x650 mm > (see tablet on data sheet). Grain size of material and required capacity in relation to clear area acc. to tablet is main criterion for application in transport way (0 – 5 mm, sporadic graines max. 10 mm). Distance control is ensured by means of pneumatic or electrical drive.
Delivered VU is equipped with drive elements from prestigious suppliers acc. to recommendation of producer, alternatively acc. to wish of customer.

DESCRIPTION OF CONSTRUCTION:

Roll closing gates are designed for installing in inclined and in vertical gravitational chutes of square profile for quick shut-off of material flow in technological line. Inside roll is actuated by means of rotary pneumatic or electric drive of equivalent size corresponding to necessary torsion moment. Manually or distance controlled distributors and valves are supplied with VU in case using of a pneumatic drive. For pneumatic operating of VU there is necessary to ensure conditioned air.

Construction – casing (body) of VU is welded and has inlet and outlet square flange. Material flow regulating ensures inside roll with passage opening with armoured slip and shut surface. The roll is fitted through journals into self-lubricating sleeves on out side covers of VU. The inside roll, journal fitting and outside covers are equipped with sealings to prevent dustiness.

A special type of construction and special requirements must be consulted with supplier !!! 

Files to download

Co děláme?

Dodávky dopravního zařízení a kompletů

jako jsou např. pásové dopravníky, korečkové elevátory, šnekové dopravníky, skříňové a pásové podavače, turniketové podavače, šoupátkové uzávěry, uzavírací klapky, míchače a elementy pro pneudopravu.

Řešení technologických procesů úpravy nerostných surovin

a výroby stavebního kameniva s následným zpracováním realizační dokumentace a ucelenými dodávkami výrobních uzlů a provozních souborů.

Dále můžeme vyrábět a dodávat

Ocelové konstrukce (pouze části, které kompletují námi dodávané stroje, tzn. vstupní a výstupní části, obslužné plošiny), sila, zásobníky, skluzy atd.

CONTACT FORM